AUVA SW Isolatoren
speziell für Subwoofer

Hybrid Isolation Technology

Hybride Isolationstechnologie
für definierten Subwoofer-Bass

Der AUVA SW absorbiert die kraftvollen Vibrationen hoher Amplitude von Subwoofern direkt an der Quelle und sorgt so für ein souveränes, präzises System.

Ein integrierter Subwoofer verleiht Tiefe und Druck, ohne die Lautsprecher zu überlagern, sodass diese mehr Details wiedergeben können. Indem er störende Körperschallvibrationen eliminiert, sorgt der AUVA SW für einen straffen, kontrollierten Bass. So verschmilzt der Subwoofer mit dem System, und Klarheit, Realismus sowie räumliche Informationen bleiben erhalten.

Kritiker Testberichte

“Bass sounds cleaner, transients are sharper, and cabinet-induced colouration is convincingly reduced. I came to this product curious, and left convinced.”

Testbericht von Stereonet

“The moment you place your sub on them, the improvement in clarity is immediately detectable. You effectively hear more of the driver and less of the room ringing. While the difference was easily…

Testbericht von Late Night Unboxing

“The bass still extends deep, but it’s faster and far better controlled, with a quicker response and cleaner start-and-stop behaviour. With very bass-heavy instruments like double bass or cello, the…

Testbericht von iiWi Reviews

“The AUVA SW feet impressed me greatly with the way they improved bass note shape and definition and also reduced in-room resonance spread through the floor. This is comparable to effective room…

Testbericht von The Ear

“The AUVA SWs’ influence on the overall sound quality is far from subtle. If you like to play loud, your neighbours might appreciate the AUVA SWs as well.”

Testbericht von Hans Beekhuyzen

“From my proven subwoofer isolation solutions, Stack Audio’s AUVA SW is tidiest and easiest on the pocket. If you want more pitch-defined bass that stops with less overhang to give the low registers…

Testbericht von 6moons

“The tightness that these brought to the bass, I already had my subwoofers dialed in really nicely, but the tightness, impact, and slam, along with the cleanliness of the bass, I did not think my RELs…

Testbericht von The Freight

Alle Bewertungen

Energieabsorbierende AUVA-Pods sitzen oben auf jedem Isolator. Im Inneren absorbiert und zerstreut eine abgestimmte Partikelmasse Vibrationen und wandelt sie in Wärme um.

Das CSA-SW Element ist ein eigens entwickelter Silikonabsorber, der auf der bewährten Technologie des AUVA EQ aufbaut. Es ist auf das Schwingungsverhalten von Subwoofern abgestimmt und für optimale Leistung in sechs gewichtsangepassten Versionen erhältlich.

Das präzisionsgefräste Aluminiumgehäuse ist so geformt, dass es die Nachgiebigkeit des CSA-SW kontrolliert und sicherstellt, dass es sich exakt wie vorgesehen bewegt. Diese Präzision erlaubt es uns, die Grenzen der Nachgiebigkeit auszureizen und die Bassentkopplung zu maximieren, ohne die Stabilität zu beeinträchtigen.

Der AUVA SW wurde teilweise mithilfe der Finite-Elemente-Analyse entwickelt, um sein Verhalten unter der Energie eines Subwoofers zu modellieren. In neunundzwanzig Designiterationen wurden Isolation und Energieableitung optimiert – für eine noch straffere Kontrolle im Tieftonbereich.

Technische Details

AUVA EQ isolator side viewAUVA EQ isolator top view

Installation

AUVA SW Isolatoren sind in den gängigsten Gewindegrößen für Subwoofer erhältlich. Für Modelle ohne Gewinde werden serienmäßig Adapterplatten mitgeliefert, sodass die Isolatoren mit sicherem Halt und stabil direkt unter dem Subwoofer platziert werden können. Sowohl die Adapterplatten als auch die Gewindebefestigungen ermöglichen bei der Aufstellung eine feine Höhenjustierung.

Technische
Daten

Größe(D) 50 (H) 36.4mm
CSA 11-16kg, (2.2-35.2lbs) pro 4er-Set
CSA 216-24kg, (35.2-52.9lbs) pro 4er-Set
CSA 324-32kg (52.9-70.5lbs) pro 4er-Set
CSA 432-40kg (70.5-88.18lbs) pro 4er-Set
CSA 540-48kg (88.1-105.82lbs) pro 4er-Set
CSA 648-56kg (105.82-123.45lbs) pro 4er-Set

FAQs

Lautsprecher und Subwoofer haben unterschiedliche Anforderungen. Lautsprecher profitieren davon, starr gehalten zu werden, während die Gehäusevibrationen absorbiert werden – das bewahrt die Ausrichtung der Chassis und die räumliche Abbildung. Subwoofer erzeugen überwiegend ungerichtete, langwellige Energie, die sich leicht über den Boden ausbreitet.

Der AUVA SW nutzt eine abgestimmte Nachgiebigkeit, passend zum Gewicht Ihres Subwoofers, um ihn zu entkoppeln und diesen Körperschall abzubauen. So wird der Bass straffer, ohne dass eine starre Ankopplung nötig ist.

REL stimmt die Höhe jedes Subwoofers präzise ab, und die Warnung richtet sich gegen das Anheben des Gehäuses auf hohe, weiche Plattformen oder nicht abgestimmte nachgiebige Füße. Diese können den Tiefbass tatsächlich ausdünnen.

Der AUVA SW ist anders. Er ist auf das Gewicht Ihres Subwoofers abgestimmt, und seine Höhe lässt sich von 39.8mm bis 52mm einstellen – das deckt die Originalfüße von REL ab: 44mm bei der T/ Series und 50mm bei der S/ Series und der Carbon-Reihe. Bei angeglichener Höhe zeigen unabhängige REW-Messungen, dass die wesentliche Veränderung ein reduziertes strukturelles Ausschwingen zwischen 40 und 80Hz ist – nicht ein geringerer Pegel.

Unser ausführlicher Ratgeber, Subwoofer-Entkopplung & REL, behandelt dieses Thema im Detail.

Der AUVA SW bietet reichlich Bodenfreiheit und flexible Höhenoptionen, sodass Sie den aktuellen Abstand Ihres Chassis oder Bassreflexrohrs zum Boden beibehalten oder leicht vergrößern können:

Mit Adapterplatte (ohne Gewinde): 39.8 bis 42.8mm Direkt in Ihren Subwoofer geschraubt: 40.0 bis 43.0mm Mit einer zusätzlichen Rändelmutter: 44.0 bis 51.0mm

Nach unten abstrahlende Subwoofer sind innerhalb dieser Bereiche in der Regel sehr unempfindlich.

Nein. Der AUVA SW kann direkt in Ihren Subwoofer geschraubt werden, sofern dieser passende Gewinde hat – er ersetzt dann die vorhandenen Füße ohne jegliche Modifikation. Hat Ihr Subwoofer keine Gewinde, stellen Sie die Isolatoren mithilfe unserer Adapterplatten darunter, die eine Silikon-Kontaktschicht für sicheren Halt bieten. Beide Varianten ermöglichen eine Höhenverstellung.

Bitte beachten Sie, dass das Entfernen der Subwooferfüße oder das Anbringen von Adapterplatten die Garantie des Subwooferherstellers beeinträchtigen kann.

Die Gewindegröße finden Sie in der Regel in der Bedienungsanleitung Ihres Subwoofers. Falls nicht, schreiben Sie uns mit Ihrem Subwoofermodell an info@stackaudio.co.uk, und wir ermitteln sie für Sie.

Der AUVA SW ist mit folgenden Gewindeadaptern erhältlich: ¼"-20, ⅜"-16, ½"-13, M6-1.0, M8-1.25, M10-1.25, M10-1.5, M12-1.25 und M12-1.75.

Wählen Sie den Einsatz nach dem Gesamtgewicht Ihres Subwoofers. Jeder Vierersatz ist auf einen bestimmten Bereich abgestimmt:

SW CSA 1: 1–16kg (2.2–35.2lbs) SW CSA 2: 16–24kg (35.2–52.9lbs) SW CSA 3: 24–32kg (52.9–70.5lbs) SW CSA 4: 32–40kg (70.5–88.2lbs) SW CSA 5: 40–48kg (88.2–105.8lbs) SW CSA 6: 48–56kg (105.8–123.5lbs)

Wenn Sie unsicher sind, nennen Sie uns Modell und Gewicht Ihres Subwoofers, und wir empfehlen Ihnen die passende Variante.

Nein. Die Entkopplung eines Subwoofers nimmt dem Bass nicht seine körperliche Spürbarkeit; sie beseitigt das unerwünschte Bodenzittern, das ihn übertreibt. Dieses Zittern entsteht, weil der Subwoofer die Bausubstanz Ihres Raums in Schwingung versetzt – nicht durch die tieffrequente Energie selbst.

Mit einem korrekt entkoppelten Subwoofer erhalten Sie denselben Druck und dasselbe Gewicht im Bass. Der Unterschied: Er wird straffer, schneller und kontrollierter, mit einem Impuls, der präzise statt dröhnend wirkt.

Die klangliche Abstimmung Ihres Subwoofers bleibt unverändert. Der AUVA SW strafft und klärt den Tieftonbereich, indem er Dröhnen, Resonanzen und unerwünschte Wechselwirkungen mit dem Boden beseitigt – so hören Sie mehr von dem, was Ihr Subwoofer tatsächlich wiedergibt.

Der AUVA SW funktioniert auf allen Bodenarten. Schwingende Holzböden geben nach und speichern Energie, mit Resonanzen, die bis in den Tiefbassbereich reichen können. Betonböden übertragen Körperschall und reflektieren tieffrequente Energie zurück ins Gehäuse. In beiden Fällen hilft die Entkopplung des Subwoofers.

4 x AUVA SW Isolatoren, 1 x Adapterwerkzeug, 12 x Spikes (3 pro Fuß), 4 x Befestigungsadapter und 4 x Filzscheiben. Das alternative Set enthält Adapterplatten für Subwoofer ohne Gewinde.

Sie haben ab dem Tag der Lieferung 60 Tage Zeit, die Isolatoren ausgiebig zu testen. Sollten sie Sie nicht überzeugen, organisieren wir die Abholung und erstatten Ihnen den vollen Kaufpreis, sofern alle Teile vollständig und unbeschädigt sind.

Kontakt aufnehmen

Sprechen Sie mit unserem Team und lassen Sie sich beraten, wie Sie die Leistung Ihrer Anlage verbessern können.

info@stackaudio.co.uk
+44 (0)1626 249 005
Mo – Fr / 08:00 – 16:00 Uhr britischer Zeit
Hinterlassen Sie eine Nachricht, wir antworten Ihnen

Customer Reviews

"With the AUVA feet in place, that mechanical interaction was dramatically reduced. Bass became noticeably tighter, cleaner and more articulate, with better definition of pitch and texture and far less overhang."

"I installed Stack Audio AUVA SW feet under the rear Velodyne DD10+ subwoofer, and the improvement was immediately obvious and more significant than I expected. Prior to fitting the AUVA SW feet, I could clearly hear the subwoofer coupling with the floor and carpet, which introduced muddiness to the bass and made it easier to localise where the low frequencies were coming from.

With the AUVA feet in place, that mechanical interaction was dramatically reduced. Bass became noticeably tighter, cleaner and more articulate, with better definition of pitch and texture and far less overhang. The subwoofer integrated far more seamlessly, creating a more coherent and natural presentation across the entire low-frequency range.

Interestingly, even without increasing the subwoofer volume, it felt as though there was greater true low-end extension and authority simply because the bass was now better controlled and more focused. Beyond the bass improvements, the benefits extended to the whole system: midrange and high frequencies became more defined, imaging improved, and the overall presentation sounded more realistic and stable.

To verify what I was hearing, I performed RT60 decay measurements in REW both before and after installing the AUVA SW feet. The measurements clearly showed a significant reduction in low-frequency decay times, particularly in the critical bass region, which directly mirrors the cleaner, faster and more controlled bass response I experienced during listening.

In my highly resolving system and acoustically treated room, the AUVA SW feet delivered a measurable and clearly audible upgrade, transforming the DD10+ into a far better integrated and more musical part of the system.

I have attached below the REW RT60 graph for reference, which visually confirms the improvement in decay performance (blue line before and purple line after installing)."

Marc K. - UK

Used with: Velodyne DD10+ subwoofer

"I have tighter bass, greater detail in the LF and they match the AUVA 100 my speakers sit on. One of the great things I have found is that the SW have improved the whole frequency, high to low, due to having less LF influence on the rest of the audio band. They have been a much welcomed addition to what Stack has already provided for my system."

Oliver L - UK

Used with: Arke Audio Kratos subwoofer

"The AUVA SWs certainly are a considerable improvement over the SVS Soundpath feet I used before. With the AUVA SWs bass instruments are better defined and the soundstage is more coherent. This was already easily detectable right out of the box. And there is an unexpected bonus: with the AUVA SWs it has become much easier to fine tune the settings of my SVS SB-2000 Pro, in order to suit the imperfection of my room acoustics and ears.

It seems to me that Theo and Josh of Stack Audio once again did a fine job, developing an excellent upgrade at a competitive price. I already had their AUVA 70’s under my Wharfedale Evo 4.3 speakers and AUVA EQ’s under my Cambridge EXA100 amp, much to my satisfaction. The delivery of the AUVA SW’s was swift, by the way. I ordered them on Monday afternoon and just three days later they were delivered at my doorstep."

Michiel S. - NL

Used with: SVS SB-2000 Pro subwoofer

"Two-day delivery to USA, Great! Packaging, Build and Presentation, Excellent!! Sub/System Sonic Improvements…OMG!!!

As we call it in the deep south, Voodoo! The magic these four little sub isolators have worked out in my system kept me picking my jaw off the floor! They just have no right to positively transform my overall musical presentation’s bottom-to-top bandwidth like they do! If you have any interest in what the AUVA-SW   Sub Isolators  did to my ears (and potentially can yours), please allow me to elaborate below.

With 25 years in music study, degree, performance, and teaching, I found my passion for fidelity music reproduction, one that I have perused for the past half century! Currently, in my fine-tuned dynamic speaker 2-channel audio system (LAiV uDAC, feeding Starkrimson GaNFET power amp, powering reference RAAL 3-way tower speakers and musical Axiom EP500 12” powered sub), my dedicated music room has allowed me to achieve fidelity soundstage realism that is consistently mind-blowing. There has been steady learning and sonic gains with every aspect of my system during these years (going pure digital, CD transport to external DAC, AUVA 50s and EQs, etc.) and to my ears, I had everything and wanted for nothing in listening session auditory fidelity bliss! THEN, these SWs showed up at my door!?!

Now, the fast, tight, tuneful bass response is even More impactful and much richer with better defined texture, pitch, and tonality! Though I did not associate sonic issues before, with the AUVA SW isolators installed, any bass ringing and bloom have disappeared and articulation, clarity, depth, PRaT, and note identification have solidly reigned in! Having only a single sub (left of the left tower, 40Hz LP), now find its sonic integration with the full-range towers and overall center phantom soundstage blends seamlessly, creating the sub total disappearance. Much of this sonic bass improvement was not expected, but certainly very welcomed!!

I still have trouble understanding how and why, but an even “bigger surprise” arose (Totally Unexpected). After the first 30 minutes, the SW isolators settled in to their new home and the Soundstage width, depth and height started changing? After the first hour of break-in, the soundstage 3-D holographic presentations grew at-least 50% more (was huge before), with much more realistic and refined air, body and spatial definition to vocalist, instrumentalist, strings, keyboards and percussionist…Totally Mind-Blowing! Imaging fidelity is more precise, more believable, and more natural, All allowing the system and room to even better disappear, placing Me, the Performers and the Music  inside the recorded venue ! Lagniappe (another Cajun saying)...I am now totally in Audio Nirvana !! "

Ted T - US

Used with: Axiom Audio EP500 subwoofer

"The SWs are awesome, an order of magnitude more seamless in how they present, and it was very good before."

Chris S. - Australia

Used with: REL G1 Gibraltar subwoofers

“Bass has tightened up significantly, and is more impactful”

Alon M. - UK

Used with: REL T9i subwoofer

“it really felt like the bass has tightened up and become more controlled.”

Rob M. - UK

Used with: REL T/5x subwoofer

"Like everything else I have purchased from Stack the results were impressive...sublime even. The bass is now clearer, tighter, easier to follow but as often with subwoofers, the mid-range and treble have also benefited from snapping into tighter focus.

Also, as far as I'm concerned, the smaller Stack feet look better than the rather large silver REL feet that I've replaced. Good news all around!"

Paul G. - UK

Used with: REL subwoofer

"The improvement in bass response using the AUVA SW footers under my single JL Audio e110 subwoofer supporting my Manger P1 passives is immediate.

Not just better low frequency pitch, tightness and clarity, but better music throughout the entire frequency range.  My system is more ‘open’; instrument and vocal separation is improved, tone is truer, hints of muddiness or compression are audibly reduced. Individual bass notes from different low-frequency instruments are clearer and better defined. The ‘fullness’ of musical reproduction that subs provide is better than before — after replacing another brand’s footers with the Stack Audio product.  I have several of your products in my system and, in my opinion, the sub footers have made the most significant improvement, playing vinyl as well as CDs. I’ve recently spent considerable money on upgrades to my system ($20k in upgrades to a $100k+ system in US$) and the Stack sub footers rank right up there with the $7k upgrade to my First Sound preamp. I installed all 4 footers under the sub‘s four corners using the Stack screw-in inserts, resting the sub directly on top of each.  Super easy install. I think you have another winner."

Mark M. - Canada

Used with: JL Audio e110 subwoofer

"The entire presentation is seamless, supremely detailed all the way down to the bottom. I had to turn the sub up two notches because they damped the room antinodes so much."

"Please feedback to your dark gods that these new sub AUVA are truly an amazing piece of infernal engineering.

I bought my Rel s510 because it was touted to pair very well with my Harbeths. And it did until I put AUVA under the Harbeths. They became so delicate and nuanced that I relegated the lowest 35hz to be slightly overrepresented and boomy, which was fine because it's rare that an instrument goes that low.

But now... Oh now the entire presentation is seamless, supremely detailed all the way down to the bottom. I had to turn the sub up two notches because they damped the room antinodes so much. And the nicest change was that I no longer feel a low bassy punch of a bass drum through the floor, I feel it with my chest."

Heath C. - Australia

Used with: REL S510 subwoofer

"The new AUVA subwoofer isolators are truly excellent. It isn't easy to position them perfectly beneath the kc62 but that is die to the kefs, not the isolators. They are a massive improvement over the isoacoustics sub-200s I used for my two kc62s before. The main difference is in bass presences which is much more modest, in the most positive way possible. It is there but it isn't loud and obnoxious anymore."

Xander C - NL

Used with: KEF KC62 subwoofers

"I installed SWs and experienced a change. Very profound change as well. The amount of cleaning of vibrations and interference done by SWs must have been huge, as I enjoy more life-like music, instruments, feel of recording space, depth etc, etc… and it is so true, that the rest of the frequencies are affected by the subs. Illusion of being there….

I appreciate that all that change is a sum of different elements, in my case, all settling in and producing the rewards, but the jump in quality was easily detectable right after I had fitted SWs. Without a doubt this set contributed a lot to my new enjoyment level. Happy place."

Voytek C - UK

“The SW have a positive effect! Better resolution. Cleaner sound.”

Denis W. - NL

Used with: Buchardt subwoofer

“The SW feet transformed the integration of the sub to the mains (in Stereo). Quite incredible.”

George W.

Used with: REL T9x subwoofer

“It is very difficult to hear where the subwoofer is placed and it blends in much better with the music.”

Kim F. - SE

Used with: REL HT 1510 subwoofers

“Noticeable difference in bass. It's tighter, cleaner, and faster without losing any texture.”

Dan

“Significantly tighter, controlled bass with less booming and ringing, fine detail and contour in the deep bass audibly increase.”

Dirk - DE

Used with: Merovingian Audio subwoofer

“My bass and lower midrange are detailed and cohesive. The bass slam and impact have dramatically increased.”

Walt

Used with: REL Carbon Special subwoofers

“in addition to having much more controlled bass, the mids and highs have improved significantly.”

Rodrigo A. - ES

Used with: REL subwoofer

“Especially the SW's, they are a significantly better than the Svs soundpath's. The bass is much more cleaner and also a little louder.”

Alfons - NL

“The AUVA SWs elevated the performance of my REL Carbon Special Black Labels very significantly. The isolators decoupled the subs from the room so well, it almost seemed as if the subs had been suspended from the ceiling.”

Chris M. - CA

Used with: REL Carbon Special Black subwoofers

“They increase the clarity of the overall sound not just the bass which is much cleaner and tighter. Sounds have even more room to breathe.”

Sean C. - UK

Alle Bewertungen

Kritiker Testberichte

“Bass sounds cleaner, transients are sharper, and cabinet-induced colouration is convincingly reduced. I came to this product curious, and left convinced.”

Testbericht von Stereonet

“The moment you place your sub on them, the improvement in clarity is immediately detectable. You effectively hear more of the driver and less of the room ringing. While the difference was easily…

Testbericht von Late Night Unboxing

“The bass still extends deep, but it’s faster and far better controlled, with a quicker response and cleaner start-and-stop behaviour. With very bass-heavy instruments like double bass or cello, the…

Testbericht von iiWi Reviews

“The AUVA SW feet impressed me greatly with the way they improved bass note shape and definition and also reduced in-room resonance spread through the floor. This is comparable to effective room…

Testbericht von The Ear

“The AUVA SWs’ influence on the overall sound quality is far from subtle. If you like to play loud, your neighbours might appreciate the AUVA SWs as well.”

Testbericht von Hans Beekhuyzen

“From my proven subwoofer isolation solutions, Stack Audio’s AUVA SW is tidiest and easiest on the pocket. If you want more pitch-defined bass that stops with less overhang to give the low registers…

Testbericht von 6moons

“The tightness that these brought to the bass, I already had my subwoofers dialed in really nicely, but the tightness, impact, and slam, along with the cleanliness of the bass, I did not think my RELs…

Testbericht von The Freight

Alle Bewertungen

AUVA SW kaufen

AUVA SW Subwoofer-Isolatoren
AUVA SW Subwoofer-Isolatoren

AUVA SW Subwoofer-Isolatoren

description

Subwoofer übertragen kraftvolle tieffrequente Energie in den Boden, regen den Raum an und überdecken Details. Der AUVA SW ist ein Hybrid-Isolator, der speziell für Subwoofer-Lasten entwickelt wurde und mit drei abgestimmten Technologien Schwingungen direkt an der Quelle kontrolliert. Er strafft den Bass, reduziert Dröhnen und lässt den Subwoofer natürlicher mit dem übrigen System verschmelzen.

Unsicher, welches Gewinde oder welche CSA Sie benötigen? https://stackaudio.co.uk/what-thread-does-my-subwoofer-require/

£325.00inkl. MwSt.

1
  • 60 Tage Geld-zurück-GarantieVolle Erstattung, kostenlose Abholung
  • Kostenloser VersandOn orders over £250
  • Regionaler VersandVersand innerhalb von 2 Werktagen
  • Top bewertet auf TrustPilotVon unseren Kunden mit „Hervorragend“ bewertet

Each AUVA SW is matched to the weight of the subwoofer so the compliant element operates at its ideal point. This tuned behaviour allows the isolator to remain stable under heavy bass output while delivering the highest level of vibration control.

Optimal load (per set of 4)

  • CSA 1: 1-16kg (2.2 - 35.2lbs)
  • CSA 2: 16-24kg (35.2-52.9lbs)
  • CSA 3: 24-32kg (52.9-70.5lbs)
  • CSA 4: 32-40kg (70.5 - 88.18lbs)
  • CSA 5: 40-48kg (88.1 - 105.82lbs)
  • CSA 6: 48-56KG (105.82 - 123.45lbs)

AUVA SW isolators are available in the most common thread sizes used for subwoofers. Adapter plates come as standard for models that don’t use threads, allowing the isolators to sit directly beneath the subwoofer with proper support and stability. Both the adapter plates and the thread fixings allow for small height adjustments during setup.

During testing, we found that the AUVA SWs performed optimally without spikes even when used on carpet. If you would still like to use spikes to protect your carpet, please contact us directly.

All Stack Audio products come with a 60-day money-back guarantee.

UK orders ship from our UK warehouse, with UK VAT included.

All European orders ship from our warehouse in the Netherlands, with your country’s VAT included at checkout, so there are no import duties to pay on delivery.

All US orders ship domestically from our US fulfilment centre. A 10% price adjustment covers pre-paid import costs, so the price you see is the price you pay, with no customs delays.

All Australian orders ship from our Australian fulfilment centre. A single location-based price adjustment covers GST, import handling and processing upfront, so the price you see at checkout is the final price you pay.

Orders to the rest of the world ship from our UK warehouse and are shown without VAT. Local import duties and taxes may be charged on delivery.

Useful duty and shipping information can be found here.

Learn more: https://www.youtube.com/watch?v=If4I-1DssuI&t=2s