Isolateurs AUVA SW
conçus pour les caissons de basses

Hybrid Isolation Technology

Technologie d'isolation hybride
pour des basses de caisson parfaitement définies

L'AUVA SW est conçu pour absorber à la source les vibrations puissantes et de forte amplitude des caissons de basses, pour un système posé et précis.

L'intégration d'un caisson de basses apporte profondeur et impact sans prendre le pas sur les enceintes, qui peuvent ainsi restituer davantage de détails. En éliminant les vibrations structurelles perturbatrices, l'AUVA SW garantit des basses tendues et maîtrisées. Le caisson se fond ainsi dans le système, préservant clarté, réalisme et repères spatiaux.

Critique Avis

“Bass sounds cleaner, transients are sharper, and cabinet-induced colouration is convincingly reduced. I came to this product curious, and left convinced.”

Avis de Stereonet

“The moment you place your sub on them, the improvement in clarity is immediately detectable. You effectively hear more of the driver and less of the room ringing. While the difference was easily…

Avis de Late Night Unboxing

“The bass still extends deep, but it’s faster and far better controlled, with a quicker response and cleaner start-and-stop behaviour. With very bass-heavy instruments like double bass or cello, the…

Avis de iiWi Reviews

“The AUVA SW feet impressed me greatly with the way they improved bass note shape and definition and also reduced in-room resonance spread through the floor. This is comparable to effective room…

Avis de The Ear

“The AUVA SWs’ influence on the overall sound quality is far from subtle. If you like to play loud, your neighbours might appreciate the AUVA SWs as well.”

Avis de Hans Beekhuyzen

“From my proven subwoofer isolation solutions, Stack Audio’s AUVA SW is tidiest and easiest on the pocket. If you want more pitch-defined bass that stops with less overhang to give the low registers…

Avis de 6moons

“The tightness that these brought to the bass, I already had my subwoofers dialed in really nicely, but the tightness, impact, and slam, along with the cleanliness of the bass, I did not think my RELs…

Avis de The Freight

Tous les avis

Des modules AUVA absorbeurs d'énergie se trouvent au sommet de chaque isolateur. À l'intérieur, une masse de particules accordée absorbe et disperse les vibrations en les convertissant en chaleur.

L'élément CSA-SW est un absorbeur en silicone sur mesure qui s'appuie sur la technologie éprouvée de l'AUVA EQ. Accordé aux caractéristiques vibratoires des caissons de basses, il est disponible en six versions adaptées au poids pour des performances optimales.

Le boîtier en aluminium usiné avec précision est façonné pour contrôler la compliance du CSA-SW, afin qu'il se déplace exactement comme prévu. Cette précision nous permet de repousser les limites de la compliance, en maximisant l'isolation des basses sans compromettre la stabilité.

L'AUVA SW a été en partie développé à l'aide de l'analyse par éléments finis afin de modéliser son comportement face à l'énergie d'un caisson de basses. Vingt-neuf itérations ont été affinées pour optimiser l'isolation et la dissipation de l'énergie, afin que l'ingénierie offre un contrôle plus serré du grave.

Détails techniques

AUVA EQ isolator side viewAUVA EQ isolator top view

Installation

Les isolateurs AUVA SW sont disponibles dans les tailles de filetage les plus courantes pour les caissons de basses. Des plaques d'adaptation sont fournies de série pour les modèles sans filetage, permettant aux isolateurs de se placer directement sous le caisson avec un soutien et une stabilité adéquats. Les plaques d'adaptation comme les fixations filetées permettent de légers ajustements de hauteur lors de l'installation.

Caractéristiques
physiques

Dimensions(D) 50 (H) 36.4mm
CSA 11-16kg, (2.2-35.2lbs) par jeu de 4
CSA 216-24kg, (35.2-52.9lbs) par jeu de 4
CSA 324-32kg (52.9-70.5lbs) par jeu de 4
CSA 432-40kg (70.5-88.18lbs) par jeu de 4
CSA 540-48kg (88.1-105.82lbs) par jeu de 4
CSA 648-56kg (105.82-123.45lbs) par jeu de 4

FAQs

Les enceintes et les caissons de basses n'ont pas les mêmes besoins. Les enceintes gagnent à être maintenues de façon rigide tandis que les vibrations de leur coffret sont absorbées, ce qui préserve l'alignement des haut-parleurs et l'image stéréo. Les caissons de basses génèrent une énergie essentiellement omnidirectionnelle, à grande longueur d'onde, qui se propage facilement à travers les sols.

L'AUVA SW utilise une souplesse accordée, adaptée au poids de votre caisson, pour découpler celui-ci et dissiper cette énergie transmise par la structure. Le grave gagne ainsi en tenue sans nécessiter de couplage rigide.

REL règle avec précision la hauteur de chacun de ses caissons, et sa mise en garde concerne le fait de surélever le coffret sur des plateformes hautes et molles ou sur des pieds souples non accordés. Ceux-ci peuvent effectivement appauvrir l'extrême grave.

L'AUVA SW est différent. Il est accordé au poids de votre caisson, et sa hauteur se règle de 39.8mm à 52mm, couvrant celle des pieds d'origine REL : 44mm sur la série T/ et 50mm sur la série S/ et la gamme Carbon. À hauteur égale, des mesures REW indépendantes montrent que le changement principal est une réduction de la décroissance structurelle entre 40 et 80Hz, et non une baisse du niveau.

Notre guide complet, Isolation des caissons de basses & REL, aborde ce sujet en détail.

L'AUVA SW offre un dégagement généreux et des options de hauteur flexibles, vous permettant de conserver, ou d'augmenter légèrement, la distance actuelle entre votre haut-parleur ou votre évent et le sol :

Avec la plaque d'adaptation (sans filetage) : 39.8 à 42.8mm Vissé directement dans votre caisson : 40.0 à 43.0mm Avec un écrou moleté supplémentaire : 44.0 à 51.0mm

Les caissons à haut-parleur orienté vers le sol sont généralement très tolérants dans ces plages.

Non. L'AUVA SW peut être vissé directement dans votre caisson de basses s'il dispose de points de fixation compatibles, en remplacement des pieds existants et sans aucune modification. Si votre caisson n'a pas de filetage, placez les isolateurs dessous à l'aide de nos plaques d'adaptation, qui ajoutent une couche de contact en silicone pour un appui stable. Les deux options permettent de régler la hauteur.

Veuillez noter que le retrait des pieds de votre caisson, ou la pose de plaques d'adaptation, peut affecter la garantie du fabricant du caisson.

Vous trouverez généralement la taille du filetage dans le manuel d'utilisation de votre caisson de basses. Sinon, écrivez à info@stackaudio.co.uk en indiquant le modèle de votre caisson, et nous la trouverons pour vous.

L'AUVA SW est disponible avec les adaptateurs de filetage suivants : ¼"-20, ⅜"-16, ½"-13, M6-1.0, M8-1.25, M10-1.25, M10-1.5, M12-1.25 et M12-1.75.

Choisissez l'insert en fonction du poids total de votre caisson de basses. Chaque jeu de quatre est accordé pour une plage précise :

SW CSA 1 : 1–16kg (2.2–35.2lbs) SW CSA 2 : 16–24kg (35.2–52.9lbs) SW CSA 3 : 24–32kg (52.9–70.5lbs) SW CSA 4 : 32–40kg (70.5–88.2lbs) SW CSA 5 : 40–48kg (88.2–105.8lbs) SW CSA 6 : 48–56kg (105.8–123.5lbs)

En cas de doute, contactez-nous en indiquant le modèle et le poids de votre caisson, et nous vous recommanderons la solution la plus adaptée.

Non. Isoler un caisson de basses ne supprime pas la sensation physique du grave ; cela élimine les vibrations indésirables du sol qui l'exagèrent. Ces vibrations proviennent du caisson qui fait vibrer la structure de votre pièce, et non de l'énergie basse fréquence elle-même.

Une fois le caisson correctement découplé, vous conservez la même pression et le même poids dans le grave. Ce qui change, c'est qu'il devient plus tendu, plus rapide et mieux maîtrisé, avec un impact qui paraît précis plutôt que boursouflé.

Il ne modifie pas la signature sonore de votre caisson. Il resserre et clarifie le bas du spectre en éliminant le traînage, les résonances et les interactions indésirables avec le sol, pour que vous entendiez davantage ce que votre caisson produit réellement.

L'AUVA SW fonctionne sur tous les types de sols. Les planchers bois suspendus fléchissent et emmagasinent de l'énergie, avec des résonances pouvant atteindre la zone de l'infra-grave. Les sols en béton transmettent les vibrations structurelles et renvoient l'énergie basse fréquence vers le coffret. Dans les deux cas, découpler le caisson de basses est bénéfique.

4 x isolateurs AUVA SW, 1 x outil d'adaptation, 12 x pointes (3 par pied), 4 x adaptateurs de fixation et 4 x disques en feutre. Le kit alternatif comprend des plaques d'adaptation pour les caissons de basses sans filetage.

Vous disposez de 60 jours à compter de leur réception pour essayer les isolateurs. S'ils ne vous conviennent pas, nous organisons l'enlèvement et vous remboursons intégralement, à condition que les pièces soient complètes et en bon état.

Nous contacter

Contactez notre équipe pour obtenir des conseils afin d'améliorer les performances de votre système.

info@stackaudio.co.uk
+44 (0)1626 249 005
Lun – Ven / 08:00 – 16:00 heure du Royaume-Uni
Laissez un message et nous vous répondrons

Customer Reviews

"With the AUVA feet in place, that mechanical interaction was dramatically reduced. Bass became noticeably tighter, cleaner and more articulate, with better definition of pitch and texture and far less overhang."

"I installed Stack Audio AUVA SW feet under the rear Velodyne DD10+ subwoofer, and the improvement was immediately obvious and more significant than I expected. Prior to fitting the AUVA SW feet, I could clearly hear the subwoofer coupling with the floor and carpet, which introduced muddiness to the bass and made it easier to localise where the low frequencies were coming from.

With the AUVA feet in place, that mechanical interaction was dramatically reduced. Bass became noticeably tighter, cleaner and more articulate, with better definition of pitch and texture and far less overhang. The subwoofer integrated far more seamlessly, creating a more coherent and natural presentation across the entire low-frequency range.

Interestingly, even without increasing the subwoofer volume, it felt as though there was greater true low-end extension and authority simply because the bass was now better controlled and more focused. Beyond the bass improvements, the benefits extended to the whole system: midrange and high frequencies became more defined, imaging improved, and the overall presentation sounded more realistic and stable.

To verify what I was hearing, I performed RT60 decay measurements in REW both before and after installing the AUVA SW feet. The measurements clearly showed a significant reduction in low-frequency decay times, particularly in the critical bass region, which directly mirrors the cleaner, faster and more controlled bass response I experienced during listening.

In my highly resolving system and acoustically treated room, the AUVA SW feet delivered a measurable and clearly audible upgrade, transforming the DD10+ into a far better integrated and more musical part of the system.

I have attached below the REW RT60 graph for reference, which visually confirms the improvement in decay performance (blue line before and purple line after installing)."

Marc K. - UK

Used with: Velodyne DD10+ subwoofer

"I have tighter bass, greater detail in the LF and they match the AUVA 100 my speakers sit on. One of the great things I have found is that the SW have improved the whole frequency, high to low, due to having less LF influence on the rest of the audio band. They have been a much welcomed addition to what Stack has already provided for my system."

Oliver L - UK

Used with: Arke Audio Kratos subwoofer

"The AUVA SWs certainly are a considerable improvement over the SVS Soundpath feet I used before. With the AUVA SWs bass instruments are better defined and the soundstage is more coherent. This was already easily detectable right out of the box. And there is an unexpected bonus: with the AUVA SWs it has become much easier to fine tune the settings of my SVS SB-2000 Pro, in order to suit the imperfection of my room acoustics and ears.

It seems to me that Theo and Josh of Stack Audio once again did a fine job, developing an excellent upgrade at a competitive price. I already had their AUVA 70’s under my Wharfedale Evo 4.3 speakers and AUVA EQ’s under my Cambridge EXA100 amp, much to my satisfaction. The delivery of the AUVA SW’s was swift, by the way. I ordered them on Monday afternoon and just three days later they were delivered at my doorstep."

Michiel S. - NL

Used with: SVS SB-2000 Pro subwoofer

"Two-day delivery to USA, Great! Packaging, Build and Presentation, Excellent!! Sub/System Sonic Improvements…OMG!!!

As we call it in the deep south, Voodoo! The magic these four little sub isolators have worked out in my system kept me picking my jaw off the floor! They just have no right to positively transform my overall musical presentation’s bottom-to-top bandwidth like they do! If you have any interest in what the AUVA-SW   Sub Isolators  did to my ears (and potentially can yours), please allow me to elaborate below.

With 25 years in music study, degree, performance, and teaching, I found my passion for fidelity music reproduction, one that I have perused for the past half century! Currently, in my fine-tuned dynamic speaker 2-channel audio system (LAiV uDAC, feeding Starkrimson GaNFET power amp, powering reference RAAL 3-way tower speakers and musical Axiom EP500 12” powered sub), my dedicated music room has allowed me to achieve fidelity soundstage realism that is consistently mind-blowing. There has been steady learning and sonic gains with every aspect of my system during these years (going pure digital, CD transport to external DAC, AUVA 50s and EQs, etc.) and to my ears, I had everything and wanted for nothing in listening session auditory fidelity bliss! THEN, these SWs showed up at my door!?!

Now, the fast, tight, tuneful bass response is even More impactful and much richer with better defined texture, pitch, and tonality! Though I did not associate sonic issues before, with the AUVA SW isolators installed, any bass ringing and bloom have disappeared and articulation, clarity, depth, PRaT, and note identification have solidly reigned in! Having only a single sub (left of the left tower, 40Hz LP), now find its sonic integration with the full-range towers and overall center phantom soundstage blends seamlessly, creating the sub total disappearance. Much of this sonic bass improvement was not expected, but certainly very welcomed!!

I still have trouble understanding how and why, but an even “bigger surprise” arose (Totally Unexpected). After the first 30 minutes, the SW isolators settled in to their new home and the Soundstage width, depth and height started changing? After the first hour of break-in, the soundstage 3-D holographic presentations grew at-least 50% more (was huge before), with much more realistic and refined air, body and spatial definition to vocalist, instrumentalist, strings, keyboards and percussionist…Totally Mind-Blowing! Imaging fidelity is more precise, more believable, and more natural, All allowing the system and room to even better disappear, placing Me, the Performers and the Music  inside the recorded venue ! Lagniappe (another Cajun saying)...I am now totally in Audio Nirvana !! "

Ted T - US

Used with: Axiom Audio EP500 subwoofer

"The SWs are awesome, an order of magnitude more seamless in how they present, and it was very good before."

Chris S. - Australia

Used with: REL G1 Gibraltar subwoofers

“Bass has tightened up significantly, and is more impactful”

Alon M. - UK

Used with: REL T9i subwoofer

“it really felt like the bass has tightened up and become more controlled.”

Rob M. - UK

Used with: REL T/5x subwoofer

"Like everything else I have purchased from Stack the results were impressive...sublime even. The bass is now clearer, tighter, easier to follow but as often with subwoofers, the mid-range and treble have also benefited from snapping into tighter focus.

Also, as far as I'm concerned, the smaller Stack feet look better than the rather large silver REL feet that I've replaced. Good news all around!"

Paul G. - UK

Used with: REL subwoofer

"The improvement in bass response using the AUVA SW footers under my single JL Audio e110 subwoofer supporting my Manger P1 passives is immediate.

Not just better low frequency pitch, tightness and clarity, but better music throughout the entire frequency range.  My system is more ‘open’; instrument and vocal separation is improved, tone is truer, hints of muddiness or compression are audibly reduced. Individual bass notes from different low-frequency instruments are clearer and better defined. The ‘fullness’ of musical reproduction that subs provide is better than before — after replacing another brand’s footers with the Stack Audio product.  I have several of your products in my system and, in my opinion, the sub footers have made the most significant improvement, playing vinyl as well as CDs. I’ve recently spent considerable money on upgrades to my system ($20k in upgrades to a $100k+ system in US$) and the Stack sub footers rank right up there with the $7k upgrade to my First Sound preamp. I installed all 4 footers under the sub‘s four corners using the Stack screw-in inserts, resting the sub directly on top of each.  Super easy install. I think you have another winner."

Mark M. - Canada

Used with: JL Audio e110 subwoofer

"The entire presentation is seamless, supremely detailed all the way down to the bottom. I had to turn the sub up two notches because they damped the room antinodes so much."

"Please feedback to your dark gods that these new sub AUVA are truly an amazing piece of infernal engineering.

I bought my Rel s510 because it was touted to pair very well with my Harbeths. And it did until I put AUVA under the Harbeths. They became so delicate and nuanced that I relegated the lowest 35hz to be slightly overrepresented and boomy, which was fine because it's rare that an instrument goes that low.

But now... Oh now the entire presentation is seamless, supremely detailed all the way down to the bottom. I had to turn the sub up two notches because they damped the room antinodes so much. And the nicest change was that I no longer feel a low bassy punch of a bass drum through the floor, I feel it with my chest."

Heath C. - Australia

Used with: REL S510 subwoofer

"The new AUVA subwoofer isolators are truly excellent. It isn't easy to position them perfectly beneath the kc62 but that is die to the kefs, not the isolators. They are a massive improvement over the isoacoustics sub-200s I used for my two kc62s before. The main difference is in bass presences which is much more modest, in the most positive way possible. It is there but it isn't loud and obnoxious anymore."

Xander C - NL

Used with: KEF KC62 subwoofers

"I installed SWs and experienced a change. Very profound change as well. The amount of cleaning of vibrations and interference done by SWs must have been huge, as I enjoy more life-like music, instruments, feel of recording space, depth etc, etc… and it is so true, that the rest of the frequencies are affected by the subs. Illusion of being there….

I appreciate that all that change is a sum of different elements, in my case, all settling in and producing the rewards, but the jump in quality was easily detectable right after I had fitted SWs. Without a doubt this set contributed a lot to my new enjoyment level. Happy place."

Voytek C - UK

“The SW have a positive effect! Better resolution. Cleaner sound.”

Denis W. - NL

Used with: Buchardt subwoofer

“The SW feet transformed the integration of the sub to the mains (in Stereo). Quite incredible.”

George W.

Used with: REL T9x subwoofer

“It is very difficult to hear where the subwoofer is placed and it blends in much better with the music.”

Kim F. - SE

Used with: REL HT 1510 subwoofers

“Noticeable difference in bass. It's tighter, cleaner, and faster without losing any texture.”

Dan

“Significantly tighter, controlled bass with less booming and ringing, fine detail and contour in the deep bass audibly increase.”

Dirk - DE

Used with: Merovingian Audio subwoofer

“My bass and lower midrange are detailed and cohesive. The bass slam and impact have dramatically increased.”

Walt

Used with: REL Carbon Special subwoofers

“in addition to having much more controlled bass, the mids and highs have improved significantly.”

Rodrigo A. - ES

Used with: REL subwoofer

“Especially the SW's, they are a significantly better than the Svs soundpath's. The bass is much more cleaner and also a little louder.”

Alfons - NL

“The AUVA SWs elevated the performance of my REL Carbon Special Black Labels very significantly. The isolators decoupled the subs from the room so well, it almost seemed as if the subs had been suspended from the ceiling.”

Chris M. - CA

Used with: REL Carbon Special Black subwoofers

“They increase the clarity of the overall sound not just the bass which is much cleaner and tighter. Sounds have even more room to breathe.”

Sean C. - UK

Tous les avis

Critique Avis

“Bass sounds cleaner, transients are sharper, and cabinet-induced colouration is convincingly reduced. I came to this product curious, and left convinced.”

Avis de Stereonet

“The moment you place your sub on them, the improvement in clarity is immediately detectable. You effectively hear more of the driver and less of the room ringing. While the difference was easily…

Avis de Late Night Unboxing

“The bass still extends deep, but it’s faster and far better controlled, with a quicker response and cleaner start-and-stop behaviour. With very bass-heavy instruments like double bass or cello, the…

Avis de iiWi Reviews

“The AUVA SW feet impressed me greatly with the way they improved bass note shape and definition and also reduced in-room resonance spread through the floor. This is comparable to effective room…

Avis de The Ear

“The AUVA SWs’ influence on the overall sound quality is far from subtle. If you like to play loud, your neighbours might appreciate the AUVA SWs as well.”

Avis de Hans Beekhuyzen

“From my proven subwoofer isolation solutions, Stack Audio’s AUVA SW is tidiest and easiest on the pocket. If you want more pitch-defined bass that stops with less overhang to give the low registers…

Avis de 6moons

“The tightness that these brought to the bass, I already had my subwoofers dialed in really nicely, but the tightness, impact, and slam, along with the cleanliness of the bass, I did not think my RELs…

Avis de The Freight

Tous les avis

Acheter l'AUVA SW

Isolateurs pour caisson de basses AUVA SW
Isolateurs pour caisson de basses AUVA SW

Isolateurs pour caisson de basses AUVA SW

description

Les caissons de basses transmettent au sol une puissante énergie basse fréquence, qui excite la pièce et masque les détails. L'AUVA SW est un isolateur hybride conçu spécifiquement pour les charges des caissons de basses, associant trois technologies accordées pour maîtriser les vibrations à la source. Il resserre le grave, réduit le bourdonnement et aide le caisson à s'intégrer plus naturellement au reste du système.

Vous ne savez pas quel filetage ou quel CSA choisir ? https://stackaudio.co.uk/what-thread-does-my-subwoofer-require/

£325.00TVA incl.

1
  • Satisfait ou remboursé 60 joursRemboursement intégral, enlèvement gratuit
  • Livraison gratuiteOn orders over £250
  • Expédition régionaleExpédié sous 2 jours ouvrés
  • Très bien noté sur TrustPilotJugé « Excellent » par nos clients

Each AUVA SW is matched to the weight of the subwoofer so the compliant element operates at its ideal point. This tuned behaviour allows the isolator to remain stable under heavy bass output while delivering the highest level of vibration control.

Optimal load (per set of 4)

  • CSA 1: 1-16kg (2.2 - 35.2lbs)
  • CSA 2: 16-24kg (35.2-52.9lbs)
  • CSA 3: 24-32kg (52.9-70.5lbs)
  • CSA 4: 32-40kg (70.5 - 88.18lbs)
  • CSA 5: 40-48kg (88.1 - 105.82lbs)
  • CSA 6: 48-56KG (105.82 - 123.45lbs)

AUVA SW isolators are available in the most common thread sizes used for subwoofers. Adapter plates come as standard for models that don’t use threads, allowing the isolators to sit directly beneath the subwoofer with proper support and stability. Both the adapter plates and the thread fixings allow for small height adjustments during setup.

During testing, we found that the AUVA SWs performed optimally without spikes even when used on carpet. If you would still like to use spikes to protect your carpet, please contact us directly.

All Stack Audio products come with a 60-day money-back guarantee.

UK orders ship from our UK warehouse, with UK VAT included.

All European orders ship from our warehouse in the Netherlands, with your country’s VAT included at checkout, so there are no import duties to pay on delivery.

All US orders ship domestically from our US fulfilment centre. A 10% price adjustment covers pre-paid import costs, so the price you see is the price you pay, with no customs delays.

All Australian orders ship from our Australian fulfilment centre. A single location-based price adjustment covers GST, import handling and processing upfront, so the price you see at checkout is the final price you pay.

Orders to the rest of the world ship from our UK warehouse and are shown without VAT. Local import duties and taxes may be charged on delivery.

Useful duty and shipping information can be found here.

Learn more: https://www.youtube.com/watch?v=If4I-1DssuI&t=2s