Isolatori AUVA SW
progettati per subwoofer

Hybrid Isolation Technology

Tecnologia di isolamento ibrida
per bassi definiti del subwoofer

L'AUVA SW è progettato per assorbire alla fonte le vibrazioni potenti e ad alta ampiezza generate dai subwoofer, garantendo un impianto composto e preciso.

L'integrazione di un subwoofer offre profondità e impatto senza sovrastare i diffusori, permettendo loro di restituire un maggiore dettaglio. Eliminando le vibrazioni strutturali indesiderate, l'AUVA SW assicura bassi asciutti e controllati. In questo modo il subwoofer si fonde con l'impianto, preservando chiarezza, realismo e riferimenti spaziali.

Recensore Recensioni

“Bass sounds cleaner, transients are sharper, and cabinet-induced colouration is convincingly reduced. I came to this product curious, and left convinced.”

Recensione di Stereonet

“The moment you place your sub on them, the improvement in clarity is immediately detectable. You effectively hear more of the driver and less of the room ringing. While the difference was easily…

Recensione di Late Night Unboxing

“The bass still extends deep, but it’s faster and far better controlled, with a quicker response and cleaner start-and-stop behaviour. With very bass-heavy instruments like double bass or cello, the…

Recensione di iiWi Reviews

“The AUVA SW feet impressed me greatly with the way they improved bass note shape and definition and also reduced in-room resonance spread through the floor. This is comparable to effective room…

Recensione di The Ear

“The AUVA SWs’ influence on the overall sound quality is far from subtle. If you like to play loud, your neighbours might appreciate the AUVA SWs as well.”

Recensione di Hans Beekhuyzen

“From my proven subwoofer isolation solutions, Stack Audio’s AUVA SW is tidiest and easiest on the pocket. If you want more pitch-defined bass that stops with less overhang to give the low registers…

Recensione di 6moons

“The tightness that these brought to the bass, I already had my subwoofers dialed in really nicely, but the tightness, impact, and slam, along with the cleanliness of the bass, I did not think my RELs…

Recensione di The Freight

Tutte le recensioni

Sulla sommità di ogni isolatore si trovano i moduli AUVA ad assorbimento di energia. Al loro interno, una massa di particelle calibrata assorbe e disperde le vibrazioni, convertendole in calore.

L'elemento CSA-SW è un assorbitore in silicone su misura che sviluppa la collaudata tecnologia dell'AUVA EQ, calibrato sulle caratteristiche vibrazionali dei subwoofer e disponibile in sei versioni abbinate al peso per prestazioni ottimali.

L'alloggiamento in alluminio lavorato di precisione è sagomato per controllare la cedevolezza del CSA-SW, garantendo che si muova esattamente come previsto. Questa precisione ci consente di spingere al limite la cedevolezza, massimizzando l'isolamento dei bassi senza compromettere la stabilità.

L'AUVA SW è stato sviluppato in parte con l'analisi agli elementi finiti, per modellarne il comportamento con i livelli di energia di un subwoofer. Ventinove iterazioni progettuali sono state affinate per ottimizzare isolamento e dissipazione dell'energia, affinché l'ingegneria si traduca in un controllo più serrato delle basse frequenze.

Dettagli tecnici

AUVA EQ isolator side viewAUVA EQ isolator top view

Installazione

Gli isolatori AUVA SW sono disponibili nelle filettature più comuni utilizzate per i subwoofer. Per i modelli privi di filettatura sono fornite di serie piastre adattatrici, che permettono di posizionare gli isolatori direttamente sotto il subwoofer con supporto e stabilità adeguati. Sia le piastre adattatrici sia i raccordi filettati consentono piccole regolazioni in altezza durante l'installazione.

Specifiche
fisiche

Dimensioni(D) 50 (H) 36.4mm
CSA 11-16kg, (2.2-35.2lbs) per set da 4
CSA 216-24kg, (35.2-52.9lbs) per set da 4
CSA 324-32kg (52.9-70.5lbs) per set da 4
CSA 432-40kg (70.5-88.18lbs) per set da 4
CSA 540-48kg (88.1-105.82lbs) per set da 4
CSA 648-56kg (105.82-123.45lbs) per set da 4

FAQs

Diffusori e subwoofer hanno esigenze diverse. I diffusori traggono vantaggio dall'essere mantenuti rigidi mentre le vibrazioni del cabinet vengono assorbite, preservando così l'allineamento degli altoparlanti e l'immagine sonora. I subwoofer generano energia a lunghezza d'onda elevata, prevalentemente omnidirezionale, che si propaga facilmente attraverso i pavimenti.

L'AUVA SW utilizza una cedevolezza calibrata, adattata al peso del vostro subwoofer, per disaccoppiarlo e dissipare questa energia trasmessa per via strutturale. Il risultato è un basso più asciutto e controllato, senza bisogno di un accoppiamento rigido.

REL calibra con precisione l'altezza di ogni subwoofer, e la loro avvertenza riguarda il sollevamento del cabinet su piattaforme alte e morbide o su piedini cedevoli non calibrati. Questi possono effettivamente impoverire i bassi profondi.

L'AUVA SW è diverso. È calibrato sul peso del vostro subwoofer e la sua altezza è regolabile da 39.8mm a 52mm, coprendo i piedini originali REL: 44mm sulla serie T/ e 50mm sulla serie S/ e sulla gamma Carbon. Con l'altezza adeguata, misurazioni REW indipendenti mostrano che la variazione principale è una riduzione del decadimento strutturale tra 40 e 80Hz, non una riduzione dell'emissione.

La nostra guida completa, Isolamento del subwoofer e REL, tratta l'argomento in dettaglio.

L'AUVA SW offre ampio spazio libero e opzioni di altezza flessibili, così potete mantenere, o aumentare leggermente, la distanza attuale tra l'altoparlante o il condotto e il pavimento:

Con la piastra adattatrice (senza filettatura): da 39.8 a 42.8mm Avvitato direttamente nel subwoofer: da 40.0 a 43.0mm Aggiungendo un dado zigrinato: da 44.0 a 51.0mm

I subwoofer con emissione verso il basso sono generalmente molto tolleranti entro questi intervalli.

No. L'AUVA SW può essere avvitato direttamente nel subwoofer, se dispone di punti di fissaggio compatibili, sostituendo i piedini esistenti senza alcuna modifica. Se il vostro subwoofer non ha filettature, posizionate gli isolatori sotto di esso utilizzando le nostre piastre adattatrici, che aggiungono uno strato di contatto in silicone per un appoggio stabile. Entrambe le soluzioni consentono la regolazione dell'altezza.

Tenete presente che la rimozione dei piedini del subwoofer o l'applicazione delle piastre adattatrici potrebbe incidere sulla garanzia del produttore.

Di solito la misura della filettatura è indicata nel manuale d'uso del subwoofer. Se non la trovate, scrivete a info@stackaudio.co.uk indicando il modello del vostro subwoofer e la cercheremo per voi.

L'AUVA SW è disponibile con questi adattatori filettati: ¼"-20, ⅜"-16, ½"-13, M6-1.0, M8-1.25, M10-1.25, M10-1.5, M12-1.25 e M12-1.75.

Scegliete l'inserto in base al peso totale del vostro subwoofer. Ogni set da quattro è calibrato per un intervallo specifico:

SW CSA 1: 1–16kg (2.2–35.2lbs) SW CSA 2: 16–24kg (35.2–52.9lbs) SW CSA 3: 24–32kg (52.9–70.5lbs) SW CSA 4: 32–40kg (70.5–88.2lbs) SW CSA 5: 40–48kg (88.2–105.8lbs) SW CSA 6: 48–56kg (105.8–123.5lbs)

In caso di dubbi, contattateci indicando modello e peso del vostro subwoofer e vi consiglieremo la soluzione più adatta.

No. Isolare un subwoofer non elimina la percezione fisica dei bassi; elimina le vibrazioni indesiderate del pavimento che la esagerano. Queste vibrazioni derivano dal subwoofer che fa vibrare la struttura della stanza, non dall'energia a bassa frequenza in sé.

Con il subwoofer correttamente disaccoppiato, i bassi mantengono la stessa pressione e lo stesso peso. Ciò che cambia è che diventano più asciutti, rapidi e controllati, con un impatto deciso anziché rimbombante.

Non ne altera il carattere timbrico. Rende la gamma bassa più asciutta e definita eliminando rimbombi, risonanze e interazioni indesiderate con il pavimento, così sentite di più ciò che il vostro subwoofer produce realmente.

L'AUVA SW funziona su ogni tipo di pavimento. I pavimenti sospesi in legno flettono e accumulano energia, con risonanze che possono estendersi fino alla regione dei sub-bassi. I pavimenti in cemento trasmettono le vibrazioni strutturali e riflettono l'energia a bassa frequenza verso il cabinet. In entrambi i casi, disaccoppiare il subwoofer è vantaggioso.

4 x isolatori AUVA SW, 1 x utensile adattatore, 12 x punte (3 per piedino), 4 x adattatori di fissaggio e 4 x dischi in feltro. Il set alternativo include piastre adattatrici per subwoofer privi di filettatura.

Avete 60 giorni di tempo, a partire dal giorno della consegna, per provare gli isolatori. Se non vi convincono, organizzeremo il ritiro e vi rimborseremo l'intero importo, a condizione che i componenti siano completi e integri.

Contattaci

Parli con il nostro team per ricevere consigli su come migliorare le prestazioni del Suo impianto.

info@stackaudio.co.uk
+44 (0)1626 249 005
Lun – Ven / 08:00 – 16:00 ora del Regno Unito
Lasci un messaggio e Le risponderemo

Customer Reviews

"With the AUVA feet in place, that mechanical interaction was dramatically reduced. Bass became noticeably tighter, cleaner and more articulate, with better definition of pitch and texture and far less overhang."

"I installed Stack Audio AUVA SW feet under the rear Velodyne DD10+ subwoofer, and the improvement was immediately obvious and more significant than I expected. Prior to fitting the AUVA SW feet, I could clearly hear the subwoofer coupling with the floor and carpet, which introduced muddiness to the bass and made it easier to localise where the low frequencies were coming from.

With the AUVA feet in place, that mechanical interaction was dramatically reduced. Bass became noticeably tighter, cleaner and more articulate, with better definition of pitch and texture and far less overhang. The subwoofer integrated far more seamlessly, creating a more coherent and natural presentation across the entire low-frequency range.

Interestingly, even without increasing the subwoofer volume, it felt as though there was greater true low-end extension and authority simply because the bass was now better controlled and more focused. Beyond the bass improvements, the benefits extended to the whole system: midrange and high frequencies became more defined, imaging improved, and the overall presentation sounded more realistic and stable.

To verify what I was hearing, I performed RT60 decay measurements in REW both before and after installing the AUVA SW feet. The measurements clearly showed a significant reduction in low-frequency decay times, particularly in the critical bass region, which directly mirrors the cleaner, faster and more controlled bass response I experienced during listening.

In my highly resolving system and acoustically treated room, the AUVA SW feet delivered a measurable and clearly audible upgrade, transforming the DD10+ into a far better integrated and more musical part of the system.

I have attached below the REW RT60 graph for reference, which visually confirms the improvement in decay performance (blue line before and purple line after installing)."

Marc K. - UK

Used with: Velodyne DD10+ subwoofer

"I have tighter bass, greater detail in the LF and they match the AUVA 100 my speakers sit on. One of the great things I have found is that the SW have improved the whole frequency, high to low, due to having less LF influence on the rest of the audio band. They have been a much welcomed addition to what Stack has already provided for my system."

Oliver L - UK

Used with: Arke Audio Kratos subwoofer

"The AUVA SWs certainly are a considerable improvement over the SVS Soundpath feet I used before. With the AUVA SWs bass instruments are better defined and the soundstage is more coherent. This was already easily detectable right out of the box. And there is an unexpected bonus: with the AUVA SWs it has become much easier to fine tune the settings of my SVS SB-2000 Pro, in order to suit the imperfection of my room acoustics and ears.

It seems to me that Theo and Josh of Stack Audio once again did a fine job, developing an excellent upgrade at a competitive price. I already had their AUVA 70’s under my Wharfedale Evo 4.3 speakers and AUVA EQ’s under my Cambridge EXA100 amp, much to my satisfaction. The delivery of the AUVA SW’s was swift, by the way. I ordered them on Monday afternoon and just three days later they were delivered at my doorstep."

Michiel S. - NL

Used with: SVS SB-2000 Pro subwoofer

"Two-day delivery to USA, Great! Packaging, Build and Presentation, Excellent!! Sub/System Sonic Improvements…OMG!!!

As we call it in the deep south, Voodoo! The magic these four little sub isolators have worked out in my system kept me picking my jaw off the floor! They just have no right to positively transform my overall musical presentation’s bottom-to-top bandwidth like they do! If you have any interest in what the AUVA-SW   Sub Isolators  did to my ears (and potentially can yours), please allow me to elaborate below.

With 25 years in music study, degree, performance, and teaching, I found my passion for fidelity music reproduction, one that I have perused for the past half century! Currently, in my fine-tuned dynamic speaker 2-channel audio system (LAiV uDAC, feeding Starkrimson GaNFET power amp, powering reference RAAL 3-way tower speakers and musical Axiom EP500 12” powered sub), my dedicated music room has allowed me to achieve fidelity soundstage realism that is consistently mind-blowing. There has been steady learning and sonic gains with every aspect of my system during these years (going pure digital, CD transport to external DAC, AUVA 50s and EQs, etc.) and to my ears, I had everything and wanted for nothing in listening session auditory fidelity bliss! THEN, these SWs showed up at my door!?!

Now, the fast, tight, tuneful bass response is even More impactful and much richer with better defined texture, pitch, and tonality! Though I did not associate sonic issues before, with the AUVA SW isolators installed, any bass ringing and bloom have disappeared and articulation, clarity, depth, PRaT, and note identification have solidly reigned in! Having only a single sub (left of the left tower, 40Hz LP), now find its sonic integration with the full-range towers and overall center phantom soundstage blends seamlessly, creating the sub total disappearance. Much of this sonic bass improvement was not expected, but certainly very welcomed!!

I still have trouble understanding how and why, but an even “bigger surprise” arose (Totally Unexpected). After the first 30 minutes, the SW isolators settled in to their new home and the Soundstage width, depth and height started changing? After the first hour of break-in, the soundstage 3-D holographic presentations grew at-least 50% more (was huge before), with much more realistic and refined air, body and spatial definition to vocalist, instrumentalist, strings, keyboards and percussionist…Totally Mind-Blowing! Imaging fidelity is more precise, more believable, and more natural, All allowing the system and room to even better disappear, placing Me, the Performers and the Music  inside the recorded venue ! Lagniappe (another Cajun saying)...I am now totally in Audio Nirvana !! "

Ted T - US

Used with: Axiom Audio EP500 subwoofer

"The SWs are awesome, an order of magnitude more seamless in how they present, and it was very good before."

Chris S. - Australia

Used with: REL G1 Gibraltar subwoofers

“Bass has tightened up significantly, and is more impactful”

Alon M. - UK

Used with: REL T9i subwoofer

“it really felt like the bass has tightened up and become more controlled.”

Rob M. - UK

Used with: REL T/5x subwoofer

"Like everything else I have purchased from Stack the results were impressive...sublime even. The bass is now clearer, tighter, easier to follow but as often with subwoofers, the mid-range and treble have also benefited from snapping into tighter focus.

Also, as far as I'm concerned, the smaller Stack feet look better than the rather large silver REL feet that I've replaced. Good news all around!"

Paul G. - UK

Used with: REL subwoofer

"The improvement in bass response using the AUVA SW footers under my single JL Audio e110 subwoofer supporting my Manger P1 passives is immediate.

Not just better low frequency pitch, tightness and clarity, but better music throughout the entire frequency range.  My system is more ‘open’; instrument and vocal separation is improved, tone is truer, hints of muddiness or compression are audibly reduced. Individual bass notes from different low-frequency instruments are clearer and better defined. The ‘fullness’ of musical reproduction that subs provide is better than before — after replacing another brand’s footers with the Stack Audio product.  I have several of your products in my system and, in my opinion, the sub footers have made the most significant improvement, playing vinyl as well as CDs. I’ve recently spent considerable money on upgrades to my system ($20k in upgrades to a $100k+ system in US$) and the Stack sub footers rank right up there with the $7k upgrade to my First Sound preamp. I installed all 4 footers under the sub‘s four corners using the Stack screw-in inserts, resting the sub directly on top of each.  Super easy install. I think you have another winner."

Mark M. - Canada

Used with: JL Audio e110 subwoofer

"The entire presentation is seamless, supremely detailed all the way down to the bottom. I had to turn the sub up two notches because they damped the room antinodes so much."

"Please feedback to your dark gods that these new sub AUVA are truly an amazing piece of infernal engineering.

I bought my Rel s510 because it was touted to pair very well with my Harbeths. And it did until I put AUVA under the Harbeths. They became so delicate and nuanced that I relegated the lowest 35hz to be slightly overrepresented and boomy, which was fine because it's rare that an instrument goes that low.

But now... Oh now the entire presentation is seamless, supremely detailed all the way down to the bottom. I had to turn the sub up two notches because they damped the room antinodes so much. And the nicest change was that I no longer feel a low bassy punch of a bass drum through the floor, I feel it with my chest."

Heath C. - Australia

Used with: REL S510 subwoofer

"The new AUVA subwoofer isolators are truly excellent. It isn't easy to position them perfectly beneath the kc62 but that is die to the kefs, not the isolators. They are a massive improvement over the isoacoustics sub-200s I used for my two kc62s before. The main difference is in bass presences which is much more modest, in the most positive way possible. It is there but it isn't loud and obnoxious anymore."

Xander C - NL

Used with: KEF KC62 subwoofers

"I installed SWs and experienced a change. Very profound change as well. The amount of cleaning of vibrations and interference done by SWs must have been huge, as I enjoy more life-like music, instruments, feel of recording space, depth etc, etc… and it is so true, that the rest of the frequencies are affected by the subs. Illusion of being there….

I appreciate that all that change is a sum of different elements, in my case, all settling in and producing the rewards, but the jump in quality was easily detectable right after I had fitted SWs. Without a doubt this set contributed a lot to my new enjoyment level. Happy place."

Voytek C - UK

“The SW have a positive effect! Better resolution. Cleaner sound.”

Denis W. - NL

Used with: Buchardt subwoofer

“The SW feet transformed the integration of the sub to the mains (in Stereo). Quite incredible.”

George W.

Used with: REL T9x subwoofer

“It is very difficult to hear where the subwoofer is placed and it blends in much better with the music.”

Kim F. - SE

Used with: REL HT 1510 subwoofers

“Noticeable difference in bass. It's tighter, cleaner, and faster without losing any texture.”

Dan

“Significantly tighter, controlled bass with less booming and ringing, fine detail and contour in the deep bass audibly increase.”

Dirk - DE

Used with: Merovingian Audio subwoofer

“My bass and lower midrange are detailed and cohesive. The bass slam and impact have dramatically increased.”

Walt

Used with: REL Carbon Special subwoofers

“in addition to having much more controlled bass, the mids and highs have improved significantly.”

Rodrigo A. - ES

Used with: REL subwoofer

“Especially the SW's, they are a significantly better than the Svs soundpath's. The bass is much more cleaner and also a little louder.”

Alfons - NL

“The AUVA SWs elevated the performance of my REL Carbon Special Black Labels very significantly. The isolators decoupled the subs from the room so well, it almost seemed as if the subs had been suspended from the ceiling.”

Chris M. - CA

Used with: REL Carbon Special Black subwoofers

“They increase the clarity of the overall sound not just the bass which is much cleaner and tighter. Sounds have even more room to breathe.”

Sean C. - UK

Tutte le recensioni

Recensore Recensioni

“Bass sounds cleaner, transients are sharper, and cabinet-induced colouration is convincingly reduced. I came to this product curious, and left convinced.”

Recensione di Stereonet

“The moment you place your sub on them, the improvement in clarity is immediately detectable. You effectively hear more of the driver and less of the room ringing. While the difference was easily…

Recensione di Late Night Unboxing

“The bass still extends deep, but it’s faster and far better controlled, with a quicker response and cleaner start-and-stop behaviour. With very bass-heavy instruments like double bass or cello, the…

Recensione di iiWi Reviews

“The AUVA SW feet impressed me greatly with the way they improved bass note shape and definition and also reduced in-room resonance spread through the floor. This is comparable to effective room…

Recensione di The Ear

“The AUVA SWs’ influence on the overall sound quality is far from subtle. If you like to play loud, your neighbours might appreciate the AUVA SWs as well.”

Recensione di Hans Beekhuyzen

“From my proven subwoofer isolation solutions, Stack Audio’s AUVA SW is tidiest and easiest on the pocket. If you want more pitch-defined bass that stops with less overhang to give the low registers…

Recensione di 6moons

“The tightness that these brought to the bass, I already had my subwoofers dialed in really nicely, but the tightness, impact, and slam, along with the cleanliness of the bass, I did not think my RELs…

Recensione di The Freight

Tutte le recensioni

Acquista l'AUVA SW

Isolatori per subwoofer AUVA SW
Isolatori per subwoofer AUVA SW

Isolatori per subwoofer AUVA SW

description

I subwoofer trasmettono al pavimento una potente energia a bassa frequenza, eccitando l'ambiente e mascherando i dettagli. AUVA SW è un isolatore ibrido progettato specificamente per i carichi dei subwoofer, che impiega tre tecnologie accordate per controllare le vibrazioni alla fonte. Rende i bassi più asciutti, riduce il rimbombo e aiuta il subwoofer a integrarsi in modo più naturale con il resto dell'impianto.

Non siete sicuri della filettatura o del CSA necessari? https://stackaudio.co.uk/what-thread-does-my-subwoofer-require/

£325.00IVA incl.

1
  • Garanzia soddisfatti o rimborsati di 60 giorniRimborso completo, ritiro gratuito
  • Spedizione gratuitaOn orders over £250
  • Logistica regionaleSpedito entro 2 giorni lavorativi
  • Valutazioni eccellenti su TrustPilotValutato “Eccellente” dai nostri clienti

Each AUVA SW is matched to the weight of the subwoofer so the compliant element operates at its ideal point. This tuned behaviour allows the isolator to remain stable under heavy bass output while delivering the highest level of vibration control.

Optimal load (per set of 4)

  • CSA 1: 1-16kg (2.2 - 35.2lbs)
  • CSA 2: 16-24kg (35.2-52.9lbs)
  • CSA 3: 24-32kg (52.9-70.5lbs)
  • CSA 4: 32-40kg (70.5 - 88.18lbs)
  • CSA 5: 40-48kg (88.1 - 105.82lbs)
  • CSA 6: 48-56KG (105.82 - 123.45lbs)

AUVA SW isolators are available in the most common thread sizes used for subwoofers. Adapter plates come as standard for models that don’t use threads, allowing the isolators to sit directly beneath the subwoofer with proper support and stability. Both the adapter plates and the thread fixings allow for small height adjustments during setup.

During testing, we found that the AUVA SWs performed optimally without spikes even when used on carpet. If you would still like to use spikes to protect your carpet, please contact us directly.

All Stack Audio products come with a 60-day money-back guarantee.

UK orders ship from our UK warehouse, with UK VAT included.

All European orders ship from our warehouse in the Netherlands, with your country’s VAT included at checkout, so there are no import duties to pay on delivery.

All US orders ship domestically from our US fulfilment centre. A 10% price adjustment covers pre-paid import costs, so the price you see is the price you pay, with no customs delays.

All Australian orders ship from our Australian fulfilment centre. A single location-based price adjustment covers GST, import handling and processing upfront, so the price you see at checkout is the final price you pay.

Orders to the rest of the world ship from our UK warehouse and are shown without VAT. Local import duties and taxes may be charged on delivery.

Useful duty and shipping information can be found here.

Learn more: https://www.youtube.com/watch?v=If4I-1DssuI&t=2s