Aisladores AUVA SW
diseñados para subwoofers

Hybrid Isolation Technology

Tecnología de aislamiento híbrida
para unos graves de subwoofer definidos

El AUVA SW está diseñado para absorber en origen las potentes vibraciones de gran amplitud de los subwoofers, garantizando un sistema sereno y preciso.

La integración de un subwoofer aporta profundidad e impacto sin eclipsar a los altavoces, lo que les permite ofrecer más detalle. Al eliminar las vibraciones estructurales perturbadoras, el AUVA SW garantiza unos graves firmes y controlados. Así, el subwoofer se integra con el sistema, preservando la claridad, el realismo y las referencias espaciales.

Crítica Opiniones

“Bass sounds cleaner, transients are sharper, and cabinet-induced colouration is convincingly reduced. I came to this product curious, and left convinced.”

Reseña de Stereonet

“The moment you place your sub on them, the improvement in clarity is immediately detectable. You effectively hear more of the driver and less of the room ringing. While the difference was easily…

Reseña de Late Night Unboxing

“The bass still extends deep, but it’s faster and far better controlled, with a quicker response and cleaner start-and-stop behaviour. With very bass-heavy instruments like double bass or cello, the…

Reseña de iiWi Reviews

“The AUVA SW feet impressed me greatly with the way they improved bass note shape and definition and also reduced in-room resonance spread through the floor. This is comparable to effective room…

Reseña de The Ear

“The AUVA SWs’ influence on the overall sound quality is far from subtle. If you like to play loud, your neighbours might appreciate the AUVA SWs as well.”

Reseña de Hans Beekhuyzen

“From my proven subwoofer isolation solutions, Stack Audio’s AUVA SW is tidiest and easiest on the pocket. If you want more pitch-defined bass that stops with less overhang to give the low registers…

Reseña de 6moons

“The tightness that these brought to the bass, I already had my subwoofers dialed in really nicely, but the tightness, impact, and slam, along with the cleanliness of the bass, I did not think my RELs…

Reseña de The Freight

Todas las reseñas

En la parte superior de cada aislador se encuentran los módulos AUVA, que absorben la energía. En su interior, una masa de partículas afinada absorbe y dispersa la vibración, transformándola en calor.

El elemento CSA-SW es un absorbedor de silicona a medida que parte de la probada tecnología del AUVA EQ, afinado para las características vibratorias de los subwoofers y disponible en seis versiones adaptadas al peso para un rendimiento óptimo.

La carcasa de aluminio mecanizada con precisión está conformada para controlar la elasticidad del CSA-SW, garantizando que se mueva exactamente como se pretende. Esta precisión nos permite llevar la elasticidad al límite, maximizando el aislamiento de los graves sin comprometer la estabilidad.

El AUVA SW se desarrolló en parte mediante análisis de elementos finitos para modelar su comportamiento bajo la energía que genera un subwoofer. Se perfeccionaron veintinueve iteraciones de diseño para optimizar el aislamiento y la disipación de energía, garantizando que la ingeniería ofrezca un control más firme de las bajas frecuencias.

Detalles técnicos

AUVA EQ isolator side viewAUVA EQ isolator top view

Instalación

Los aisladores AUVA SW están disponibles en los tamaños de rosca más habituales en subwoofers. Para los modelos sin rosca se incluyen de serie placas adaptadoras, que permiten colocar los aisladores directamente bajo el subwoofer con el apoyo y la estabilidad adecuados. Tanto las placas adaptadoras como las fijaciones roscadas permiten pequeños ajustes de altura durante la instalación.

Especificaciones
físicas

Tamaño(D) 50 (H) 36.4mm
CSA 11-16kg, (2.2-35.2lbs) por juego de 4
CSA 216-24kg, (35.2-52.9lbs) por juego de 4
CSA 324-32kg (52.9-70.5lbs) por juego de 4
CSA 432-40kg (70.5-88.18lbs) por juego de 4
CSA 540-48kg (88.1-105.82lbs) por juego de 4
CSA 648-56kg (105.82-123.45lbs) por juego de 4

FAQs

Los altavoces y los subwoofers tienen necesidades distintas. A los altavoces les beneficia mantenerse firmemente sujetos mientras se absorben las vibraciones de su caja, lo que preserva la alineación de los drivers y la imagen estéreo. Los subwoofers generan sobre todo energía omnidireccional de longitud de onda larga que se transmite con facilidad a través del suelo.

El AUVA SW utiliza una elasticidad afinada, adaptada al peso de su subwoofer, para desacoplarlo y disipar esa energía transmitida por la estructura. Así el grave gana en firmeza sin necesidad de un acoplamiento rígido.

REL ajusta con precisión la altura de cada subwoofer, y su advertencia se refiere a elevar la caja sobre plataformas altas y blandas o sobre pies elásticos sin afinar. Estos sí pueden restar cuerpo al grave profundo.

El AUVA SW es diferente. Está afinado para el peso de su subwoofer y su altura se ajusta de 39.8mm a 52mm, cubriendo los pies de serie de REL: 44mm en la Serie T/ y 50mm en la Serie S/ y la gama Carbon. Con la altura igualada, mediciones independientes con REW muestran que el cambio principal es una menor caída estructural entre 40 y 80Hz, no una menor salida.

Nuestra guía completa, Aislamiento de subwoofers y REL, lo explica en detalle.

El AUVA SW ofrece amplio espacio libre y opciones de altura flexibles, para que pueda igualar, o aumentar ligeramente, la distancia actual entre el driver o el puerto y el suelo:

Con la placa adaptadora (sin rosca): 39.8 a 42.8mm Roscado directamente en el subwoofer: 40.0 a 43.0mm Añadiendo una tuerca de ajuste: 44.0 a 51.0mm

Los subwoofers con emisión hacia abajo suelen ser muy tolerantes dentro de estos márgenes.

No. El AUVA SW puede roscarse directamente en su subwoofer si dispone de puntos de montaje compatibles, sustituyendo los pies existentes sin ninguna modificación. Si su subwoofer no tiene roscas, coloque los aisladores debajo utilizando nuestras placas adaptadoras, que añaden una capa de contacto de silicona para un apoyo estable. Ambas opciones permiten ajustar la altura.

Tenga en cuenta que retirar los pies del subwoofer o instalar placas adaptadoras puede afectar a la garantía del fabricante.

Normalmente encontrará el tamaño de rosca en el manual de usuario de su subwoofer. Si no lo encuentra, escriba a info@stackaudio.co.uk indicando el modelo de su subwoofer y lo averiguaremos por usted.

El AUVA SW está disponible con estos adaptadores de rosca: ¼"-20, ⅜"-16, ½"-13, M6-1.0, M8-1.25, M10-1.25, M10-1.5, M12-1.25 y M12-1.75.

Elija el inserto según el peso total de su subwoofer. Cada juego de cuatro está afinado para un rango concreto:

SW CSA 1: 1–16kg (2.2–35.2lbs) SW CSA 2: 16–24kg (35.2–52.9lbs) SW CSA 3: 24–32kg (52.9–70.5lbs) SW CSA 4: 32–40kg (70.5–88.2lbs) SW CSA 5: 40–48kg (88.2–105.8lbs) SW CSA 6: 48–56kg (105.8–123.5lbs)

Si tiene dudas, contacte con nosotros indicando el modelo y el peso de su subwoofer y le recomendaremos la opción más adecuada.

No. Aislar un subwoofer no elimina la sensación física del grave; elimina la vibración no deseada del suelo que lo exagera. Esa vibración procede del subwoofer haciendo vibrar la estructura de la sala, no de la propia energía de baja frecuencia.

Con el subwoofer correctamente desacoplado, sigue obteniendo la misma presión y el mismo peso en el grave. Lo que cambia es que resulta más firme, rápido y controlado, con un impacto preciso en lugar de retumbante.

No cambiará el carácter sonoro de su subwoofer. Afirma y clarifica el grave eliminando retumbes, resonancias e interacciones no deseadas con el suelo, para que oiga más de lo que su subwoofer realmente reproduce.

El AUVA SW funciona sobre todo tipo de suelos. Los suelos de madera sobre rastreles se flexionan y almacenan energía, con resonancias que pueden llegar a la zona del subgrave. Los suelos de hormigón transmiten vibraciones por la estructura y reflejan la energía de baja frecuencia de vuelta hacia la caja. En ambos casos, desacoplar el subwoofer ayuda.

4 x aisladores AUVA SW, 1 x herramienta adaptadora, 12 x puntas (3 por pie), 4 x adaptadores de fijación y 4 x discos de fieltro. El juego alternativo incluye placas adaptadoras para subwoofers sin rosca.

Dispone de 60 días para probar los aisladores desde el día en que los reciba. Si no le convencen, organizaremos la recogida y le reembolsaremos el importe íntegro, siempre que las piezas estén completas y en buen estado.

Contacte con nosotros

Hable con nuestro equipo para recibir asesoramiento sobre cómo mejorar el rendimiento de su sistema.

info@stackaudio.co.uk
+44 (0)1626 249 005
Lun – Vie / 08:00 – 16:00 hora del Reino Unido
Déjenos un mensaje y le responderemos

Customer Reviews

"With the AUVA feet in place, that mechanical interaction was dramatically reduced. Bass became noticeably tighter, cleaner and more articulate, with better definition of pitch and texture and far less overhang."

"I installed Stack Audio AUVA SW feet under the rear Velodyne DD10+ subwoofer, and the improvement was immediately obvious and more significant than I expected. Prior to fitting the AUVA SW feet, I could clearly hear the subwoofer coupling with the floor and carpet, which introduced muddiness to the bass and made it easier to localise where the low frequencies were coming from.

With the AUVA feet in place, that mechanical interaction was dramatically reduced. Bass became noticeably tighter, cleaner and more articulate, with better definition of pitch and texture and far less overhang. The subwoofer integrated far more seamlessly, creating a more coherent and natural presentation across the entire low-frequency range.

Interestingly, even without increasing the subwoofer volume, it felt as though there was greater true low-end extension and authority simply because the bass was now better controlled and more focused. Beyond the bass improvements, the benefits extended to the whole system: midrange and high frequencies became more defined, imaging improved, and the overall presentation sounded more realistic and stable.

To verify what I was hearing, I performed RT60 decay measurements in REW both before and after installing the AUVA SW feet. The measurements clearly showed a significant reduction in low-frequency decay times, particularly in the critical bass region, which directly mirrors the cleaner, faster and more controlled bass response I experienced during listening.

In my highly resolving system and acoustically treated room, the AUVA SW feet delivered a measurable and clearly audible upgrade, transforming the DD10+ into a far better integrated and more musical part of the system.

I have attached below the REW RT60 graph for reference, which visually confirms the improvement in decay performance (blue line before and purple line after installing)."

Marc K. - UK

Used with: Velodyne DD10+ subwoofer

"I have tighter bass, greater detail in the LF and they match the AUVA 100 my speakers sit on. One of the great things I have found is that the SW have improved the whole frequency, high to low, due to having less LF influence on the rest of the audio band. They have been a much welcomed addition to what Stack has already provided for my system."

Oliver L - UK

Used with: Arke Audio Kratos subwoofer

"The AUVA SWs certainly are a considerable improvement over the SVS Soundpath feet I used before. With the AUVA SWs bass instruments are better defined and the soundstage is more coherent. This was already easily detectable right out of the box. And there is an unexpected bonus: with the AUVA SWs it has become much easier to fine tune the settings of my SVS SB-2000 Pro, in order to suit the imperfection of my room acoustics and ears.

It seems to me that Theo and Josh of Stack Audio once again did a fine job, developing an excellent upgrade at a competitive price. I already had their AUVA 70’s under my Wharfedale Evo 4.3 speakers and AUVA EQ’s under my Cambridge EXA100 amp, much to my satisfaction. The delivery of the AUVA SW’s was swift, by the way. I ordered them on Monday afternoon and just three days later they were delivered at my doorstep."

Michiel S. - NL

Used with: SVS SB-2000 Pro subwoofer

"Two-day delivery to USA, Great! Packaging, Build and Presentation, Excellent!! Sub/System Sonic Improvements…OMG!!!

As we call it in the deep south, Voodoo! The magic these four little sub isolators have worked out in my system kept me picking my jaw off the floor! They just have no right to positively transform my overall musical presentation’s bottom-to-top bandwidth like they do! If you have any interest in what the AUVA-SW   Sub Isolators  did to my ears (and potentially can yours), please allow me to elaborate below.

With 25 years in music study, degree, performance, and teaching, I found my passion for fidelity music reproduction, one that I have perused for the past half century! Currently, in my fine-tuned dynamic speaker 2-channel audio system (LAiV uDAC, feeding Starkrimson GaNFET power amp, powering reference RAAL 3-way tower speakers and musical Axiom EP500 12” powered sub), my dedicated music room has allowed me to achieve fidelity soundstage realism that is consistently mind-blowing. There has been steady learning and sonic gains with every aspect of my system during these years (going pure digital, CD transport to external DAC, AUVA 50s and EQs, etc.) and to my ears, I had everything and wanted for nothing in listening session auditory fidelity bliss! THEN, these SWs showed up at my door!?!

Now, the fast, tight, tuneful bass response is even More impactful and much richer with better defined texture, pitch, and tonality! Though I did not associate sonic issues before, with the AUVA SW isolators installed, any bass ringing and bloom have disappeared and articulation, clarity, depth, PRaT, and note identification have solidly reigned in! Having only a single sub (left of the left tower, 40Hz LP), now find its sonic integration with the full-range towers and overall center phantom soundstage blends seamlessly, creating the sub total disappearance. Much of this sonic bass improvement was not expected, but certainly very welcomed!!

I still have trouble understanding how and why, but an even “bigger surprise” arose (Totally Unexpected). After the first 30 minutes, the SW isolators settled in to their new home and the Soundstage width, depth and height started changing? After the first hour of break-in, the soundstage 3-D holographic presentations grew at-least 50% more (was huge before), with much more realistic and refined air, body and spatial definition to vocalist, instrumentalist, strings, keyboards and percussionist…Totally Mind-Blowing! Imaging fidelity is more precise, more believable, and more natural, All allowing the system and room to even better disappear, placing Me, the Performers and the Music  inside the recorded venue ! Lagniappe (another Cajun saying)...I am now totally in Audio Nirvana !! "

Ted T - US

Used with: Axiom Audio EP500 subwoofer

"The SWs are awesome, an order of magnitude more seamless in how they present, and it was very good before."

Chris S. - Australia

Used with: REL G1 Gibraltar subwoofers

“Bass has tightened up significantly, and is more impactful”

Alon M. - UK

Used with: REL T9i subwoofer

“it really felt like the bass has tightened up and become more controlled.”

Rob M. - UK

Used with: REL T/5x subwoofer

"Like everything else I have purchased from Stack the results were impressive...sublime even. The bass is now clearer, tighter, easier to follow but as often with subwoofers, the mid-range and treble have also benefited from snapping into tighter focus.

Also, as far as I'm concerned, the smaller Stack feet look better than the rather large silver REL feet that I've replaced. Good news all around!"

Paul G. - UK

Used with: REL subwoofer

"The improvement in bass response using the AUVA SW footers under my single JL Audio e110 subwoofer supporting my Manger P1 passives is immediate.

Not just better low frequency pitch, tightness and clarity, but better music throughout the entire frequency range.  My system is more ‘open’; instrument and vocal separation is improved, tone is truer, hints of muddiness or compression are audibly reduced. Individual bass notes from different low-frequency instruments are clearer and better defined. The ‘fullness’ of musical reproduction that subs provide is better than before — after replacing another brand’s footers with the Stack Audio product.  I have several of your products in my system and, in my opinion, the sub footers have made the most significant improvement, playing vinyl as well as CDs. I’ve recently spent considerable money on upgrades to my system ($20k in upgrades to a $100k+ system in US$) and the Stack sub footers rank right up there with the $7k upgrade to my First Sound preamp. I installed all 4 footers under the sub‘s four corners using the Stack screw-in inserts, resting the sub directly on top of each.  Super easy install. I think you have another winner."

Mark M. - Canada

Used with: JL Audio e110 subwoofer

"The entire presentation is seamless, supremely detailed all the way down to the bottom. I had to turn the sub up two notches because they damped the room antinodes so much."

"Please feedback to your dark gods that these new sub AUVA are truly an amazing piece of infernal engineering.

I bought my Rel s510 because it was touted to pair very well with my Harbeths. And it did until I put AUVA under the Harbeths. They became so delicate and nuanced that I relegated the lowest 35hz to be slightly overrepresented and boomy, which was fine because it's rare that an instrument goes that low.

But now... Oh now the entire presentation is seamless, supremely detailed all the way down to the bottom. I had to turn the sub up two notches because they damped the room antinodes so much. And the nicest change was that I no longer feel a low bassy punch of a bass drum through the floor, I feel it with my chest."

Heath C. - Australia

Used with: REL S510 subwoofer

"The new AUVA subwoofer isolators are truly excellent. It isn't easy to position them perfectly beneath the kc62 but that is die to the kefs, not the isolators. They are a massive improvement over the isoacoustics sub-200s I used for my two kc62s before. The main difference is in bass presences which is much more modest, in the most positive way possible. It is there but it isn't loud and obnoxious anymore."

Xander C - NL

Used with: KEF KC62 subwoofers

"I installed SWs and experienced a change. Very profound change as well. The amount of cleaning of vibrations and interference done by SWs must have been huge, as I enjoy more life-like music, instruments, feel of recording space, depth etc, etc… and it is so true, that the rest of the frequencies are affected by the subs. Illusion of being there….

I appreciate that all that change is a sum of different elements, in my case, all settling in and producing the rewards, but the jump in quality was easily detectable right after I had fitted SWs. Without a doubt this set contributed a lot to my new enjoyment level. Happy place."

Voytek C - UK

“The SW have a positive effect! Better resolution. Cleaner sound.”

Denis W. - NL

Used with: Buchardt subwoofer

“The SW feet transformed the integration of the sub to the mains (in Stereo). Quite incredible.”

George W.

Used with: REL T9x subwoofer

“It is very difficult to hear where the subwoofer is placed and it blends in much better with the music.”

Kim F. - SE

Used with: REL HT 1510 subwoofers

“Noticeable difference in bass. It's tighter, cleaner, and faster without losing any texture.”

Dan

“Significantly tighter, controlled bass with less booming and ringing, fine detail and contour in the deep bass audibly increase.”

Dirk - DE

Used with: Merovingian Audio subwoofer

“My bass and lower midrange are detailed and cohesive. The bass slam and impact have dramatically increased.”

Walt

Used with: REL Carbon Special subwoofers

“in addition to having much more controlled bass, the mids and highs have improved significantly.”

Rodrigo A. - ES

Used with: REL subwoofer

“Especially the SW's, they are a significantly better than the Svs soundpath's. The bass is much more cleaner and also a little louder.”

Alfons - NL

“The AUVA SWs elevated the performance of my REL Carbon Special Black Labels very significantly. The isolators decoupled the subs from the room so well, it almost seemed as if the subs had been suspended from the ceiling.”

Chris M. - CA

Used with: REL Carbon Special Black subwoofers

“They increase the clarity of the overall sound not just the bass which is much cleaner and tighter. Sounds have even more room to breathe.”

Sean C. - UK

Todas las reseñas

Crítica Opiniones

“Bass sounds cleaner, transients are sharper, and cabinet-induced colouration is convincingly reduced. I came to this product curious, and left convinced.”

Reseña de Stereonet

“The moment you place your sub on them, the improvement in clarity is immediately detectable. You effectively hear more of the driver and less of the room ringing. While the difference was easily…

Reseña de Late Night Unboxing

“The bass still extends deep, but it’s faster and far better controlled, with a quicker response and cleaner start-and-stop behaviour. With very bass-heavy instruments like double bass or cello, the…

Reseña de iiWi Reviews

“The AUVA SW feet impressed me greatly with the way they improved bass note shape and definition and also reduced in-room resonance spread through the floor. This is comparable to effective room…

Reseña de The Ear

“The AUVA SWs’ influence on the overall sound quality is far from subtle. If you like to play loud, your neighbours might appreciate the AUVA SWs as well.”

Reseña de Hans Beekhuyzen

“From my proven subwoofer isolation solutions, Stack Audio’s AUVA SW is tidiest and easiest on the pocket. If you want more pitch-defined bass that stops with less overhang to give the low registers…

Reseña de 6moons

“The tightness that these brought to the bass, I already had my subwoofers dialed in really nicely, but the tightness, impact, and slam, along with the cleanliness of the bass, I did not think my RELs…

Reseña de The Freight

Todas las reseñas

Compre el AUVA SW

Aisladores para subwoofer AUVA SW
Aisladores para subwoofer AUVA SW

Aisladores para subwoofer AUVA SW

description

Los subwoofers transmiten al suelo una potente energía de baja frecuencia que excita la sala y enmascara los detalles. El AUVA SW es un aislador híbrido diseñado específicamente para las cargas de un subwoofer, que emplea tres tecnologías afinadas para controlar las vibraciones en su origen. Aporta graves más firmes, reduce la retumbancia y ayuda a que el subwoofer se integre de forma más natural con el resto del equipo.

¿No está seguro de qué rosca o CSA necesita? https://stackaudio.co.uk/what-thread-does-my-subwoofer-require/

£325.00IVA incl.

1
  • Garantía de devolución de 60 díasReembolso íntegro, recogida gratuita
  • Envío gratuitoOn orders over £250
  • Logística regionalEnviado en 2 días laborables
  • Excelente valoración en TrustPilotValorado como «Excelente» por nuestros clientes

Each AUVA SW is matched to the weight of the subwoofer so the compliant element operates at its ideal point. This tuned behaviour allows the isolator to remain stable under heavy bass output while delivering the highest level of vibration control.

Optimal load (per set of 4)

  • CSA 1: 1-16kg (2.2 - 35.2lbs)
  • CSA 2: 16-24kg (35.2-52.9lbs)
  • CSA 3: 24-32kg (52.9-70.5lbs)
  • CSA 4: 32-40kg (70.5 - 88.18lbs)
  • CSA 5: 40-48kg (88.1 - 105.82lbs)
  • CSA 6: 48-56KG (105.82 - 123.45lbs)

AUVA SW isolators are available in the most common thread sizes used for subwoofers. Adapter plates come as standard for models that don’t use threads, allowing the isolators to sit directly beneath the subwoofer with proper support and stability. Both the adapter plates and the thread fixings allow for small height adjustments during setup.

During testing, we found that the AUVA SWs performed optimally without spikes even when used on carpet. If you would still like to use spikes to protect your carpet, please contact us directly.

All Stack Audio products come with a 60-day money-back guarantee.

UK orders ship from our UK warehouse, with UK VAT included.

All European orders ship from our warehouse in the Netherlands, with your country’s VAT included at checkout, so there are no import duties to pay on delivery.

All US orders ship domestically from our US fulfilment centre. A 10% price adjustment covers pre-paid import costs, so the price you see is the price you pay, with no customs delays.

All Australian orders ship from our Australian fulfilment centre. A single location-based price adjustment covers GST, import handling and processing upfront, so the price you see at checkout is the final price you pay.

Orders to the rest of the world ship from our UK warehouse and are shown without VAT. Local import duties and taxes may be charged on delivery.

Useful duty and shipping information can be found here.

Learn more: https://www.youtube.com/watch?v=If4I-1DssuI&t=2s